Need help? Contact Us!

1300 851 842

Thermal Imaging For Electrical Fault Detection

Detect system overloads, loose defective components and damaged switchgear. Infrared electrical testing finds hot, dangerous problems quickly!

Infrared electrical inspections find hot spots caused by defects in connections and components. Infrared thermography is used to find areas of excess heat (caused by increased resistance) so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards and productivity loss. Because increased heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration. This is why your insurance company may have asked for an electrical infrared inspection, to find and prevent problems before they cause damage to your personnel, equipment and facility.

Conditions detectable by an infrared inspection

  • Loose/deteriorated connections

  • Overloads

  • Open circuits

  • Unbalanced loads

  • Inductive heatingsection

  • Harmonics

  • Defective equipment


Benefits of an Infrared Inspection


  • Reduce unscheduled down time

  • Increase equipment life

  • No service interruption during inspection

  • Lower risks

  • Lower repair costs

  • Increase profits

  • Prevent catastrophic failures

  • Lower insurance premiums due to reduced losses

Kick off with a safe start to 2017 by having one of our qualified technicians at Highpoint Solutions thermally inspect your electrical components and switch-gear.